RT30 Rough Terrain Crane
- Product Category : Cold Milling Machine
- Brand : XJCM
- Product Origin : CHINA
- Delivery Time : 1-90DAYS
- Supply Capacity : 1-500UNITS
- Max. Lifting Capacity:30T
- Max. Boom Length:35.1m
- Max. Lifting Height:36m
RT30 Rough Terrain Crane
30 ton rough terrain crane is a telescopic boom and slewing crane that uses a tire-type chassis to travel. It is compose of the superstructure and undercarriage. The upper structure is the lifting part. It consists of telescopic boom, auxiliary boom, main winch and auxiliary winch. Winch, luffing mechanism, counterweight, turntable.The undercarriage is compose of the suspension and walking part. The superstructure and the undercarriage are connecte by the slewing bearing.
- Front-wheel steering, rear-wheel steering, four-wheel steering and crab steering, all-wheel drive, off-road performance, suitable for off-highway travel；
- Outriggers are available for all tasks. Working with half-extended outriggers, working with fully retracted outriggers, working with outriggers and non-driving load；
- Suitable for narrow space travel and operations; small turning radius; strong maneuverability.
- Safe and reliable control system, two-seats, all-directional lifting operation, greatly enhanced the ability of the front lifting operation.
- The crane has good passability, dynamic performance and maneuverability. It can carry out all-round operation and hoisting driving without outriggers. The products are widely used in heavy-duty lifting operations, short-distance transfer, and narrow-site lifting operations on construction sites. Such as construction sites, open-air oil fields, warehouses, freight yards, logistics bases, etc.
Rough terrain crane consists of special crane chassis and lifting operation device. Including power system, transmission system, suspension system, steering system, braking system, lifting, mechanism, luffing mechanism, hydraulic system, electrical system, etc.
RT30 Main Technical Parameters Table In Travel State
- parameters1
- Parameters 2
| Category | Items | Units | Parameters | ||
| Outline Dimensions | Overall length | mm | 11680 | ||
| Overall width | mm | 3080 | |||
| Overall height | mm | 3690 | |||
| Axle base | mm | 3600 | |||
| Tyre tread | mm | 2560 | |||
| Weight | Dead weight in travel state | Kg | 27700 | ||
| Axle load | Front axle | Kg | 14280 | ||
| Rear axle | Kg | 13420 | |||
| Power | Engine rated output | Kw/(r/min) | 169/2500 | ||
| Engine rated torque | N.m(r/min) | 900/1400 | |||
| Travel | Travel speed | Max. travel speed | Km/h | 40 | |
| Min. stable travel speed | Km/h | 1 | |||
| Turning radius | Min. turning radius | m | 5.1 | ||
| Min. turning radius for boom head | m | 9.25 | |||
| Min. ground clearance | mm | 400 | |||
| Approach angle | ° | 21 | |||
| Departure angle | ° | 21 | |||
| Braking distance(at 30km/h) | m | ≤9 | |||
| Max. Gradeability | % | 55 | |||
| Max. outside noise during accelerating | dB(A) | 86 | |||
|
Category |
Items |
Units |
Parameters |
||||
| Lifting performance | Max. total rated lifting load |
t |
30 |
||||
| Min.. rated working radius |
m |
3 |
|||||
| Turning radius at swing table tail |
m |
3.525 |
|||||
|
Max. load moment |
Base boom |
KN.m |
920 |
||||
| Fully extended boom |
KN.m |
560 |
|||||
| Fully extended boom + Jib |
KN.m |
380 |
|||||
| Outrigger span | Longitudinal |
m |
6.08 |
||||
| Lateral |
m |
6.5 |
|||||
| Lifting height | Boom |
m |
9.6 |
||||
| Fully extended boom |
m |
27.9 |
|||||
| Fully extend boom+Jib |
m |
36 |
|||||
| Boom length | Boom |
m |
9.18 |
||||
| Fully extended boom |
m |
27.78 |
|||||
| Fully extend boom+Jib |
m |
35.1 |
|||||
| Jib offset angle |
° |
0、30 |
|||||
|
Working speed |
Derricking time | Boom raising time |
s |
75 |
|||
| Boom descending time |
s |
75 |
|||||
| Telescoping time | Boom fully extend time |
s |
80 |
||||
| Boom fully retracting time |
s |
50 |
|||||
| Max.swing speed |
r/min |
2.0 |
|||||
| Outrigger telescoping time | Outrigger beam | Extending synchronously |
s |
25 |
|||
| Retracting synchronously |
s |
15 |
|||||
| Outrigger jack | Extending synchronously |
s |
25 |
||||
| Retracting synchronously |
s |
15 |
|||||
| Hoisting speed | Main winch (No load) |
m/min |
85 |
||||
| Auxiliary winch (No load) |
m/min |
90 |
|||||
As the name suggests, the 30-ton Crane rough terrain crane has a lifting capacity of up to 30 tons. It can lift up to 30 tons, making it a good choice for heavy-duty jobs.
The 30 tonne crane rough terrain crane is suitable for a wide range of projects. Includes construction, mining, oil and gas, and forestry operations. They can be use for a variety of lifting and material handling tasks. Examples include loading and unloading heavy equipment. Moving materials to different locations and hoisting construction materials to upper floors of buildings.
Rough terrain cranes are equippe with various safety features to ensure safe and reliable operation. Examples include load moment indicators, emergency shutdown switches and automatic overload protection systems. They also have safety devices to protect the operator, including cabs with roll-over protection, and harnesses.